Keeping your firearms properly maintained means that they will stay clean, accurate, and last a long time.
While there are many different types of oils made for guns on the market, Kroil or Kano Kroil is arguably one of the best.
Over the years, a large following has developed for Kroil thanks to unique properties that make guns easier to clean and maintain.
What is Kroil?
Kroil is a penetrating oil that is one of the most popular on the market today.
Created in the laboratories of Kano, this particular blend of oil has the ability to enter the tiny spaces, cracks, and crevices of metal and other surfaces.
The result is that the bond that forms between rusting or oxidizing compounds is broken up.
As it breaks up the compounds, the Kroil dissolves the gums, dried grease, and other residues without affecting the metal itself.
The Kroil can even displace water which prevents further oxidation.
How to Clean a Gun with Kroil?
When you want to clean your gun with Kroil, you will obviously be going to need a supply of (check on Amazon) to get started.
You will also need a gun cleaning kit that is designed for the weapon you own.
Depending on the kit it should include the following;
- Cleaning Rod
- Brass Patch Jag
- Bronze Bristle Brushes
- Cleaning Rag
- Cotton Patches
- Copper Solvent
- Rust Preventative
Now that you have the right tools, you will need to follow the proper steps to clean the gun using Kroil gun cleaning method.
You start by unloading the weapon and making sure the chamber is clear. Once you have done that, you will need to do the following;
Get the cleaning rod, attach the bronze bristle brush, and put Kroil on it. You’ll want to brush the inside the barrel for at least 20 passes.
Afterward, remove the bronze bristle brush and use the cleaning rag to remove the oil and residue from the cleaning rod.
Next, put on the patched jag and place the cotton patch on the jag. Add more AeroKroil and push the rod from the end of the chamber through the muzzle.
Let the patch fall off once it exits the muzzle. Pull the rod back through and add another cotton patch. Repeat the procedure until all the residue has been removed.
Once that is done, add a new cotton patch to the jag and put some copper solvent on the patch. Pass it from the chamber to the muzzle and let the patch fall off.
Repeat a couple of times. Wait a few minutes, then repeat again until you no longer see any copper residue which will appear blue-greenish on the patch.
Now, add a dry cotton patch and do the same thing to remove all the copper solvent.
Finally, wipe down the cleaning rod, add a new cotton patch, and apply the rust preventative. This will keep the inside of the barrel from oxidizing.
Now you have completed the cleaning procedure which will protect your weapon until the next time you use it.
Why Use Kano Kroil for Gun Cleaning?
Standard oil has too much surface tension compared to Kroil. This means that while it offers some protection, it is not as good in terms of removing rust or corrosion.
Kroil, on the other hand, is an industry proven penetrating oil that offers unmatched protection and lubrication than any other.
Kroil is quite good at getting into the tiny crevices that form in the metal, allowing for more residue to be loosened and removed with the proper gun cleaning equipment.
Plus, Kroil is often used to loosen frozen parts by providing the proper lubrication so they can move freely.
Continued use of Kroil gun cleaning also helps to keep the gun clean by not allowing the residue to build up in these small cracks and crevices.
What is Kroil made of?
Kroil is made with high solvency penetrating oils and dimethyl silicones together which offers deep penetration into the surface to provide unmatched long-lasting lubrication and rust protection.
What can I use Kroil for?
In addition to as a fabulous gun cleaner in firearms industry, it is used by 480 of the Fortune 500 companies worldwide. The fact that it creeps into one-millionth inch spaces and breaks bonds due to rust, it is used as a powerful protecting agent for various kinds of corrosion and contamination.
Will Kroil eat the plastic material?
Kroil is surely a penetrating oil and does penetrate through plastic if stored in plastic bottles. However, the penetration is not intense enough to eat or damage the plastic as whole.
Can Kroil remove the copper fouling?
Kroil oil as such does not react or penetrate through copper much. However, it can be good to use for removing the copper fouling to some extent.