Not every bullet you load is going to come out the end of the muzzle.
When a bullet gets jammed or needs to be removed, you will be thankful to have a proper bullet puller by your side.
A good bullet puller will remove the bullet from the weapon. And, it can be used to pull apart the bullet itself.
With that in mind, if you are looking to buy a good bullet puller hammer for reloading we are going to discuss with you every aspect that you need to know about it.
What Is A Bullet Puller?
In simple terms – it’s not a hammer to knock things in, but a bullet puller to pull things out.
A bullet puller is a hammer looking device meant for reloaders.
Although it looks like a typical hammer (that knock things in), its function is just opposite i.e. to pull out.
5 Best Bullet Puller for Reloading
Very simple to use a bullet remover tool is a must-have for reloaders, especially for those who are into ammunition reloading for years.
If you are planning to buy one, below are the five best options for you to look for. Check the reviews in detail before you go and buy them online.
1- Frankford Arsenal Bullet Puller
The Frankford Arsenal Quick-N-EZ Impact Bullet Puller is one of the best on the market for reloaders (whether a beginner or a professional).
This natural blue color sturdy bullet remover tool is made up of a tough polycarbonate plastic tube with a solid metal shaft.
Featuring a hammer-shaped puller it comes with 3 varied size expandable collets and 4 o-rings.
The rubber rings in the puller are inserted into the collets enabling them to expand when you use different sizes of the ammo bullets (caliber ranging from .22 Hornet to 45-70).
Just put your bullet through the collet in the hammer and get it tightly locked with the cap.
Now hit the tool hard and get the powder out of your bullet easily.
Few things we like most about this puller are:
- Lightweight, portable and easy usage – can be used even without a reloading press
- 4 o-rings are highly useful for an active user who want to use all 3 different sizes of collets
- Collets that can easily pull all the sizes of ammo bullets no matter they are rimmed or rimless
Above all, the tool is available at less than $20 which makes it highly affordable for reloaders.
- Lightweight, portable and easy usage – can be used even without a reloading press
- 4 o-rings are highly useful for an active user who want to use all 3 different sizes of collets
- Collets that can easily pull all the sizes of ammo bullets no matter they are rimmed or rimless
2- Lyman Magnum Inertia Bullet Puller (Best Puller for .223)
The Lyman Bullet Puller is much similar to the Frankford Quick-N-EZ Bullet puller with a difference that it comes in tangy orange color.
Much similar to the above one, Lyman’s Bullet Remover also carries 2 expandable collets that are compatible to use with varied bullet sizes.
While working out with this best collet bullet puller in a similar fashion you can easily pull the bullet out within seconds.
What we like most:
- Easy to use, light and portable – can be used without press
- Collets that can pull any size bullet (from Tiny 5.7 x 28FN to the biggest magnums)
- Ergonomically designed handle for a good grip while hammering through rounds of bullets
3- Hornady 050095 Cam Lock Bullet Puller
The Hornady Bullet Puller works fairly easily once you get to know how to use it correctly.
With a bit of practice, you will love using it to pull and remove loads of rounds you have without worrying about hammering down each one of them.
To start using it, you just need to install the bullet puller with the right collect.
Below is a video you can check on how to install and use a Hornady Cam-Lock Bullet Puller without going wrong.
And of course, it does save a lot of your time and energy.
What we like most:
- Relatively fast than most of the bullet pullers
- Very quick and easy to pull the bullet, once you install it right
4- RCBS Pow’r Pull Kit
The RCBS offers one of the best reloading press-based bullet pullers on the market.
Like the top ones in our list, this inertia style puller also allows you to hammer and pull the bullet out within a few seconds.
Featuring a stylish jade green color in plastic this one does not have a metal beam like other hammers out there.
Although the design is a bit different, it works very similarly to other inertia style bullet pullers.
Just find the right collect and put the bullet through. Then lock it tightly in the hammer with a cap to pull the bullet by hammering.
What we like most:
- Easy to use one-piece construction
- Portable, lightweight and can be used without a reloading press
- 2 different expandable collets to easily fit your different bullet sizes
Above all, it carries an ergonomic handle for easy gripping, which matters the most if you have 100s of bullets to pull out within a short period of time.
5- RCBS 9440 Bullet Puller without Collet
The RCBS 9440 Bullet Puller works great with reloading press and can help you pull out hundreds of bullets quickly without hitting the hammer, which can be most tiring especially for huge tasks.
Having installed it to the press you can adjust it for your bullet size and fit the right collect around it to remove the bullet.
The good thing about this RCBS 9440 Bullet Puller is its ability to pull the bullet without creating the mess.
This is due to the fact that it pulls out the bullet with powder in the cartridge which can be easily removed and used later.
What we like most:
- Unlike inertia style pullers it’s not messy
- Easy and quick at work without making you feel tired
- Made of highly durable steel material to pull thousands of bullets without fail
Why You Need A Bullet Remover Tool?
If you do not have a bullet puller as part of your gun maintenance items, you will appreciate getting one quickly.
There are good reasons why this should be in your tool bag, especially if you are shooting in competitions.
- Covers mistakes in loading ammo
- Breaks down ammo into individual parts
- Asses quality of parts of bullet or gun
- Retrieves some parts easily
The more you shoot, the more you will need a bullet puller for reloading.
It is invaluable for pulling out ammo that didn’t go off, pulling apart ammo into individual parts, and also pulling other parts of a gun out to check their quality or replace them.
How to Use a Bullet Puller Hammer Correctly?
Bullet pullers comes in a couple of different forms, which will give you just slightly different operations, though most of the features are going to be the same between each.
For example, a kinetic bullet puller is one that actually has a hammer, collet and collet cap, sometimes in different sizes. It pulls an entire cartridge of bullets.
On the other hand, what’s called a reloading press bullet puller actually holds onto the bullet and takes it out separate from the cartridge.
What you need to decide is just which type of puller die you like best and how it works.
Now, what you don’t need to worry about is igniting the powder inside the bullets while you’re trying to use a puller.
Because of the way that the puller works you’re never going to touch what’s called the primer of your gun. And that means you’re not going to get any kind of impact that could set off the powder and the bullet.
The only possible way that you could ignite anything is to pull up the hammer and then use something small to ignite the powder.
It’s definitely not an easy thing to do, so it’s not something that you really need to worry about and you’ll be able to pull as many bullets as you want.
Make sure you’re looking at the type of bullet you’re working with so that you will use the right collet to pull out the cartridges.
You’ll also want to make sure that you’re inserting your bullets the proper way, so they’re not put in upside down.
With a kinetic style puller, you also need to make sure that you insert the entire cartridge and lock it in tightly so nothing gets damaged.
A reloading press pull will allow you to insert the collet first and then the bullet into the puller. You just need to make sure that you have a tight grip on the bullet.
What Are The Various Types of Collet Bullet Pullers?
Not every bullet puller is the same, so you will need to know the different types that are available on the market.
1- Reloaders:
If you create your own ammunition, then you will need a bullet puller for that job as well.
They should be strong and sturdy to hold up to the rigors of creating bullets.
2- Impact & Inertia:
These are two types of bullet pullers that are based on different applications of force.
An impact bullet puller uses direct force to remove a bullet lodged in the weapon.
While an inertia bullet puller uses the force of inertia to remove the bullet.
3- Standard Bullet Puller Kit:
This is made by RCBS for rifles and pistols of varying models. You should purchase the one that fits the type of weapons that you own.
It is possible that you may have to purchase more than one if you fire weapons as different as revolvers, shotguns, pistols, and rifles.
Note that the type of bullet pullers available are normally categorized in online catalogs, so you should be able to find what you need quickly when you look through these catalogs.
Steps to Purchasing the Right Bullet Puller for Your Need
Now that you know the usefulness and different types of bullet pullers available, the next step is considering what attributes to look for when making a purchase.
You’ll need to select a bullet puller that incorporates all the necessary functions that you need.
✅ Compatible:
If the puller is not compatible with the bullets you are trying to retrieve, then you should not get that particular type.
Double-check to ensure that you are focused on getting the right puller that matches the types of bullets you use.
✅ Ergonomic:
You don’t want to be fighting the bullet puller as you are trying to remove ammo from your weapon.
Find one that fits your hand and does not strain your wrist when doing the work. This means that it needs to be large enough to comfortably fit while being small enough to reach in and do the job.
✅ Easy to Use:
It should be simple to figure out the proper way to use the puller, especially if you are going to be using it time and time again.
If you can’t quite figure out how it is supposed to work, then go to another one and see if that is better for your needs.
✅ Tough & Durable:
This is an attribute that all bullet pullers should have.
They need to be crafted from high-quality materials such as tool-steel to stand up to the rigors of pulling bullets from your weapons.
This is especially true if you made hundreds, if not thousands of rounds for your weapons.
✅ Safe to Use:
This is about the striking attribute which should do the job easily while not damaging the bullet or ammo itself.
You can look at reviews of bullet pullers to see which one works best for your needs.
✅ Trusted Brand:
Going with a brand you can trust can help narrow the choices even if they are somewhat more expensive.
After all, you want the best bullet puller hammer to last for a long time. Go with a trusted, reputable source when purchasing a bullet puller.
Who makes the best bullet puller?
If you are confused and still need some advice on the best brand of bullet puller, you can start with the .
I think Lyman is a brand that makes the best bullet puller for the money. Especially for me, it meets all my requirements of what makes for an excellent product.
From exceptional ergonomics to being highly durable for years of use. Arguably the best feature is the ergonomics as it handles just like a screwdriver.
The comfortable grip and excellent design make it easy to retrieve even tightly jammed ammo.
If the weapons you own or the bullets you have to retrieve match the Lyman Magnum Bullet Puller, then you should check out this product first.
What is a pulled bullet?
Pull down bullets (also called collet pulled, air pulled, or machine pulled) are typically the type of bullets and powder from Military munitions that have been disassembled.
Many people prefer to purchase these components (due to being cheap) and then reuse them in assembling down their own ammunitions.
Is inertia bullet puller safe?
Using inertia bullet puller is pretty safe for pulling bullets, provided you know how to use it properly. Many times, reloaders and shooters experienced the mishaps due to the issues that revolve around not using the puller correctly.
Can I pull bullet without a puller?
Believe me, using a collet bullet puller is one of the safest and easiest ways to pull the bullet out. I recommend you to not ever try to remove bullet without puller. If at all you want, you can try using pliers.
